Technical Service - grandimpianti 021 Manual Tecnico

www.groupdynamics-laundry.com
sales@groupdynamics.lv
that the machines are suitably installed and
made to function according to the instructions
provided and in normal working conditions.
For electric motors, the guarantee is limited to
mechanical parts only (windings are therefore
excluded).
The guarantee does not cover parts subject to
wear, such as: air filters, covers, fuses, electric
and steam cables, warning lamps, and in any
case, any parts which become faulty due to
incorrect use or which are returned to us in
mishandled conditions.
The guarantee does not include parts damaged
during transport. Our Company's responsibility
ceases when machines are consigned to the
forwarding agent.
The guarantee is limited to the replacement, ex-
works, of the parts which were faulty on delivery
and is strictly limited to parts which are returned
to us free of charges, within the guarantee period
and which are recognised by our Technical dept.
only as being faulty.
The guarantee does not cost cover the cost of
labour, or any other costs necessary to replace
the faulty parts.
Our company will not be held responsible for
damage to persons or property caused by faulty
parts due to incorrect operation of the machines.
The guarantee or the replacement of faulty parts
does not imply that our Company is responsible
for loss of profit during the time the machines
may not be working.
This guarantee annuls and replaces any other
local guarantee, either legal or otherwise (explicit
or implicit). No third person is authorised to
provide a guarantee on behalf of our Company
or to assume any other responsibility apart from
that referred to above, with regard to the product
manufactured our Company.
For the safety of the machine and the operator, the
safety devices must be kept in efficient working order.
For any advise or assistance with the running of the
machine or for spare parts, please contact our agents
or the SILC factory.
Grandimpianti customer service dept.

TECHNICAL SERVICE

If the machine should not work properly, inform SIL
FIM srl - Via Campania 19, Jesi (Ancona) - Italy,
Grandimpianti ILE ALI spa, Sospirolo Belluno, Italy
indicating the exact nature of the breakdown. The
more information is supplied concerning any fault, the
faster technical assistance can be given.
TEST REPORT
The machine has been subjected to all necessary tests
concerning the electrical and hydraulic parts at the
factory.
SAFETY TIPS FOR THE OPERATOR
10
The machine has been supplied in perfect working order.
SIL FIM srl Via Campania 19 - 60035 Jesi (AN) - Italy - Tel. 0731/21801 - Telefax 0731/200355
16
The machine was manufactured in compliance with the
essential safety regulations; however no product can
be completely protected from incorrect use.
To avoid any danger deriving from incorrect use of the
machine, it is necessary that it be used only by
competent persons after having carefully read this
instruction manual and understood the safety
measures contained therein.
Never exceed the maximum pressure limits indicated
in this manual.
Any maintenance or repair to the machine while
"live" or under steam must be avoided.
If this is inevitable, it must be carried out only by
qualified personnel, who are aware of the risks
involved in an operation of this kind.
The electric and hydraulic circuits can become
dangerous and even lethal, if the essential safety
regulations are not applied.
Make sure that the fuses used in replacement are of
the corect nominal current and of the type established.
The use of unsuitable fuses is severely prohibited.
To guarantee the safety and precision of the machine it
should be overhauled once a year.