Installation Of Safety Support - Kichler IMARI 65 Manual De Instrucciones

Ocultar thumbs Ver también para IMARI 65:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION OF SAFETY SUPPORT

(required for Canadian installation ONLY)
A safety support cable is provided to help prevent the ceiling fan from
falling.
Step 1. Attach the provided wood screw and washers to the ceiling joist
next to the mounting bracket but do not tighten. (Fig. 11)
Step 2. Adjust the length of the safety cable to reach the screw and
washers by pulling the extra cable through the cable clamp until the
overall length is correct, put the end of the cable back through the cable
clamp, forming a loop at the end of the cable. Tighten the cable clamp
securely. Now, put the loop in the end of the safety cable over the wood
screw and under the washer. Tighten the wood screw securely.
NOTE: Although the safety support cable is required for Canadian
installations only. It's a good idea to make the attachment with any
installation.
Step3. Insert the receiver into the ceiling mounting bracket with the flat
side of the receiver facing the ceiling. (Fig. 12) For best performance,
make sure the Black Antenna, on the end of the receiver, remains
extended and not tangled with any of the electrical wires.
10 | KICHLER.COM
Ceiling mounting
Attach
bracket
safety cable
to ceiling joist
with screw and
washer
Fig. 11
Receiver
Hanger
bracket
Fig. 12

Publicidad

Tabla de contenido
loading

Tabla de contenido