Installation Of Safety Support - Kichler VASSAR Manual De Instrucciones

INSTALLATION OF SAFETY SUPPORT

(required for Canadian installation ONLY)
A safety support cable is provided to help prevent the ceiling fan from
Please install it as follows:
falling.
Step 1. Attach the provided wood screw and washers to the ceiling joist
next to the mounting bracket but do not tighten. (Fig. 11)
Step 2. Adjust the length of the safety cable to reach the screw and
washers by pulling the extra cable through the cable clamp until the
overall length is correct, put the end of the cable back through the cable
clamp, forming a loop at the end of the cable. Tighten the cable clamp
securely. Now, put the loop in the end of the safety cable over the wood
screw and under the washer. Tighten the wood screw securely.
NOTE: Although the safety support cable is required for Canadian
installations only. It's a good idea to make the attachment with any
installation.
10 | KICHLER.COM
Ceiling mounting bracket
Safety support cable
Fig. 11
Attach
safety cable
to ceiling joist
with screw and
washer