Attaching The Fan Blades; Installing The Light Plate - Kichler IMARI 65 Manual De Instrucciones

ATTACHING THE FAN BLADES

Step 1. Align the holes from the blade to the holes from the motor, and
secure the blade in place with screws and flat washers provided. (Fig. 15)
Step 2. Repeat this process to attach the other two blades.
Blades
Flat washers
Screws
Fig. 15

INSTALLING THE LIGHT PLATE

Step 1. Loosen the two screws on the mounting ring attached to the
motor shaft and "remove" and save the third screw. (Fig. 16)
Step 2. Place the key hole slots on the light plate over the two screws
previously loosened on the mounting ring.
Turn the light plate until is locks in place at the narrow section of the key
Light plate
Mounting ring
hole slots.
Screws
Tighten both key hole screws and replace the third screw previously
removed and tighten securely.
Fig. 16
14 | KICHLER.COM