Attaching The Fan Blades; Installing The Light Plate - Kichler VASSAR Manual De Instrucciones

ATTACHING THE FAN BLADES

Step 1. Insert the blade through the blade slot in the motor housing.
Align the holes in blade and blade bracket, making sure the holes
are also aligned and secure with the screws, fiber washers and
blade support plates provided. Repeat process with other blades.
(Fig. 16)

INSTALLING THE LIGHT PLATE

Step 1. Loosen the two screws on the mounting ring attached to
the motor shaft and "remove" and save the third screw. (Fig. 17)
Step 2. Place the key hole slots on the light plate over the two
screws previously loosened on the mounting ring.
Turn the light plate until is locks in place at the narrow section of
the key hole slots.
Tighten both key hole screws and replace the third screw
previously removed and tighten securely.
14 | KICHLER.COM
Blades
Fiber washers
Screws
Fig. 16
Light plate
Mounting ring
Screws
Fig. 17