GENERAL INFORMATION
● This instruction manual is an integral part of the product and must be handed over to the user. Read the
instructions and warnings contained in this manual carefully as they provide important information
regarding installation, use and maintenance safety. Keep this manual in a secure place so that it can be
consulted when necessary.
Installation must be effected in compliance with the standards in force, according to the Manufacturer's
instructions and by professionally qualified personnel only. The term "qualified personnel" refers to
persons with expert technical knowledge of components for residential heating/domestic hot water
systems and especially refers to Manufacturer-authorised assistance centres. Incorrect installation may
cause damage to persons, animals or objects: the Manufacturer cannot be held liable for any such
damages.
● Remove the packaging and check that contents are in good condition. If you have any doubts do not use
the unit and contact your supplier. Packaging (wooden crates, nails, staples, plastic bags, expanded
polystyrene etc.) must be kept away from children as it is a potential source of danger.
● Before doing any cleaning or maintenance work switch off the unit at the mains by acting on the main
system switch and/or interception devices.
● Do not obstruct the intake/outlet gratings.
● Should the unit break down or fail to work properly do not attempt to carry out repairs yourself. Contact
properly qualified personnel only. Products must only be repaired by a Manufacturer-authorised assistance
centre using original spare parts only.
Failure to observe the above regulations may compromise proper unit operation.
To guarantee unit efficiency and proper operation it is essential that a properly qualified technician
carry out periodic maintenance in compliance with the Manufacturer's instructions.
● Should you decide that you no longer wish to use the unit certain precautions must be taken to render
potential sources of danger harmless.
● Should the unit be sold or come under new ownership or physically be moved to another location
always make sure that this manual stays with the unit so that it can be consulted by the new owner and/
or installer.
● Use only original accessories for all optional kits (electrical kits included).
● This burner must only be used for the purpose for which it has been designed. Any other usage shall be
considered improper and thus dangerous.
The Manufacturer shall not be liable, contractually or otherwise, for damages caused by errors of
installation or use or any failure to observe the Manufacturer's instructions.
25