CombiSteel AR 1200 Instrucciones Para La Instalación, El Uso Y El Mantenimeinto página 28

5.4 REGULAR OPERATION
ARISTARCO flight dishwashers only work if conditions and ranges of use are suitable for giving an
excellent final result.
These conditions are: a) sufficient quantity of water in the rinse stage/zone;
Operation is therefore interrupted (with alarm warning given on the control panel) whenever the
parameters of use (conditions and range) are lacking.
The diagnostics section (on control panel) indicates the reason why the cycle has been stopped.
The parameters of use must be reset in order to restart the work cycle.
For the condition a) see paragraph 9, points 2-A, 2-B, 6-B, 6-D
When the parameters a, b and the condition d have been reset, this is indicated by the relative warning lights
(red) L-M-F of diagnosis and B stop/alarm going out, while the "machine ready" indicator light D (blue)
comes on.
To reset the parameter c, put the automatic operation status back to "zero" by pressing the "stop/alarm"
button B. The indicator light (red) of the same button goes out and at the same time the "machine ready"
indicator light D (blue) comes on.
At this point restart the work cycle, as described in point 5.1 above.
b) min. temperature guaranteed in the rinse stage/zone;
c) continuity and regularity of rack feed;
d) correct closure of the inspection doors.
b) " " "
c) open the inspection doors and eliminate the cause of rack jamming (racks
wedged or whatever)
d) check that all the doors are closed properly.
" 6-D, all of point 7
28