Counter Litres; Service: Warning To Technical Maintenance; Total Espressos; Partial Counter - Expobar Diamant Manual De Mantenimiento

• Aditional capabilities reachable from the display
9.2.2.

Counter Litres

This counter shows the volume of water (litres), that has been through the machine. Its main purpose is to
facilitate the control of when a regeneration of the water softener is needed.
How to access: When the display shows "counters", accept by pressing "OK" (two short espressos).
To exit and get to the next menu, press the button continuous brewing.
•
In chapter 10.31 Water softener filter: Regeneration, it can be programmed how many litres of water
the machine will use before giving the warning of the need to regenerate the water softener. This way, the
counter counts the litres of water and warns the user when it is needed to do the regeneration of the water
softener.
To reset this counter (reset litres counter):
5. The espresso machine must be in the ON Status.
6. Turn off the machine using the main switch.
7. Maintain pressed both button 2 short espressos and 2 long
espressos, and while pressing them, turn on the espresso
machine from the main switch.
8. Press continuous to confirm the reset.
9.2.3.

Service: Warning to technical maintenance.

This counter shows on the first row, the number of services set for the machine to request for technical service
and maintenance. On the second row it is shown the number of services brewed (individual brewed services)
made by the machine since the last reset.
How to access: From the counter "Litres" get to this counter by pressing the continuous brewing button.
To get out and get to the next menu, press the button of continuous brewing.
In the chapter 10.24 Maintenance cycle: It can be programmed the number
of brewed services before the electronics give the warning to make the
technical maintenance.
To reset the counter (reset the service counter):
5. The espresso machine must be in the ON Status.
6. Turn off the machine using the main switch.
7. Maintain pressed both buttons 1 short espresso and 1 large coffee, and while pressing them, turn on
the espresso machine from the main switch.
8. Press continuous to confirm the reset.
9.2.4.

Total espressos

This totalizer adds up all the services brewed by the machine. Therefore, it
cannot be reset.
How to access: From the counter "Service", access to this counter pressing
the continuous button. To exit and proceed to the next menu, press the
continuous button.
•
This counter constitutes a total brewed services history of the machine.
9.2.5.

Partial counter

This counter constitutes a partial counter since last reset.
9.2.6.

Brewed services per keypad Counter.

This counter shows the number of brewed services brewed by each of the
possible selections of the machine.
On the superior side of the display it is shown the dosis type (Espresso, long
espresso, 2 espressos, 2 long espressos, continuous or hot water). On the
right side it is shown which of the groups is now displayed. Underneath it is
shown the amount.
•
These counters can be reset as follow: While displayed on the screen the option described in previous
chapter, press at the same time both buttons 2 short espressos and 2 long espressos for more than 4
seconds.
English 13
Water L. xxx
Total L. xxx
Counter reset
2 shorts + 2 longs
Service xxx
Cof. Cycle xxx
Press Coffee cont.
Total counter
Cof. cycle xxx
Press Coffee cont.
Partial counter
Cof. cycle xxx
Press Coffee cont.
Doses type GR N
xxx
Press continuous