Service Pone; Dosed Service Enabling; Continuous Brewing Button; Electronic Steam Wand - Expobar Diamant Manual De Mantenimiento

10.13. Service Pone.

In this menu, it is set the telephone number shown when the warning caused
by reaching the number of services set for technical maintenance.
•
To modify the selected number for the blinking character press
(+)(1 short espresso) or (-)(1 large coffee).
•
To accept the selected character and proceed to the next one,
press "OK" (2 short espressos).
To accept the line and proceed to the next menu, press the continuous brewing button.

10.14. Dosed service enabling

This menu Enables/disables the possibility of modifying the doses volumes
set. This is, makes it possible to disable (they will not work) the possibility for
the user to modify the doses set in the machine.
This option prevents the final user from dis-adjusting the doses set of the
machine.
To enable modifying the setting, press one short espresso, to disable, press one large coffee.
To accept the setting and proceed to the next menu, press the continuous button.

10.15. Continuous brewing button:

This menu toggles the behavior of the continuous brewing button into different working modes.
The options are:
# Tea + continuous. # Only coffee cont. # Only Tea
To modify the selected mode press (+)(1 short espresso) or (-)(1 large
coffee).
To accept the setting and proceed to the next menu, press the continuous
button.

10.16. Electronic Steam wand:

In this menu, it is set which Keypad is phisically connected (internally) to the
button of the electronic steam wand. By factory default this is set to 1, and it
should not be modified, as malfunctioning of the machine would occur.
Increase of decrease the value by pressing (+)(1 short espresso) or (-)(1
large coffee).
To accept the setting and proceed to the next menu, press the continuous
button.

10.17. Pre-brewing

This setting enables or disables the electronic pre-brewing. By factory default
this option is disabled, as the Brilliance's brewing groups are equipped with
mechanical pre-brewing systems.
To activate this function press (+)(1 short espresso) or (-)(1 large coffee) to
disable it..
To accept the setting and proceed to the next menu, press the continuous
button.

10.18. Adjusting the pre-brewing parameters

If in the previous menu the pre-brewing function was enabled, this menus will appear as to allow the adjusting of
the parameters of the pre-brewing. As said, this machine is already equipped with mechanical pre-brewing, so it
is not to activate this function.
On this first menu, it is adjusted the pre-brewing time for each type of
selection (short espresso, large coffee, 2 short espressos & 2 large
espressos). , in which water is pumped as to moisture the grinded coffee. To
adjust it use the one short espresso (+) or one large coffee (-) buttons.
To accept the setting and proceed to the next menu, press the continuous
button.
16
• Technical programming
Service Phone
Telephone Nr
↑+
-1 espresso
↓ -
-1 large coffee
2 short espressos OK
Continuous to confirm
Doses setting
Enabled/disabled
↑+
-1 espresso
↓ -
-1 large coffee
2 short espressos OK
Continuous to confirm
Continuous key
Option
↑+
-1 espresso
↓ -
-1 large coffee
2 short espressos OK
Continuous to confirm
Steam Boiler Gr.
N
↑+
-1 espresso
↓ -
-1 large coffee
2 short espressos OK
Continuous to confirm
Pre-brewing
Enabled/disabled
↑+
-1 espresso
↓ -
-1 large coffee
2 short espressos OK
Continuous to confirm
Pre-brew. ON sec
Selection type X.Xs
↑+
-1 espresso
↓ -
-1 large coffee
2 short espressos OK
Continuous to confirm
English