Anspach eG1 Manual De Instrucciones página 19

between portable and mobile RF communications equipment and the eG1 System
The eG1 System is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the eG1 System can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters)
and the eG1 System as recommended below, according to the maximum output power of the communications
equipment.
Rated maximum output
power of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d
in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is
the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Recommended separation distances
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d P
= 1 2 .
0.12
0.38
1.2
3.8
12
m
80 MHz to 800 MHz
d P
= 1 2 .
0.12
0.38
1.2
3.8
12
800 MHz to 2,5 GHz
d P
= 2 3 .
0.23
0.73
2.3
7.3
23
15