Harbor Breeze 40198 Manual Del Usuario página 17

FINAL INSTALLATION
3 . Partially insert three blade screws (BB) along with
three blade washers (CC) through one blade (H)
and into one blade arm (G) . Tighten each blade
screw (BB) with a Phillips screwdriver (not included),
starting with the one in the middle . Repeat this step
for the remaining blades (H) and blade arms (G) .
Haodwaoe Used
BB
Blade Screw
CC
Blade Washer
4 . Align a blade arm (G) and a blade isolator (LL) with
two holes underneath the motor (E) and insert two of
the previously-removed motor screws (EE) through
the blade arm (G) and into the motor (D) . Tighten the
screws securely . Repeat this step for the remaining
blade arms (G) .
Haodwaoe Used
AA
Motor Screw
LL
Blade Isolator
3
x 15
x 15
4
x 10
x 5
17
BB
CC
G
E
LL
G
AA
Lowes.com/harborbreeze
H
H