Harbor Breeze 40198 Manual Del Usuario página 8

ASSEMBLY INSTRUCTIONS
4 . Secure the mounting bracket (C) to the outlet box
using screws, spring washers, and flat washers
provided with the outlet box (not included) .

Note: It is very important that you use the proper
hardware when installing the mounting bracket
(C) as this will support the fan .

Impootaat: If using the angle mount, ensure that the
open end of the mounting bracket (C) is
installed facing the higher point of the
ceiling .
5 . Remove the motor screws (AA) from the underside of
the motor assembly (E) .
Note:
If there are plastic motor blocks installed with
the motor screws (AA), discard them but keep
the screws .
Haodwaoe Used
AA
Motor Screw
4
5
x 10
8
AA
Lowes.com/harborbreeze
C
E