Publicidad
Idiomas disponibles
Idiomas disponibles
1e. Remove fascia - Remove interior access panel behind each taillight to
1d. Remove fascia - Open tailgate. Using a T25 torx bit, remove (1) screw
below taillight, both sides.
reveal a plastic thumb nut.
Remove fascia continued:
1e. Remove (2) plastic thumb nuts holding taillight assembly, both sides.
1f. Using a plastic trim panel tool, remove the taillights by gently pulling rearward. Disconnect the wire harness from each taillight and set them aside.
©2018 Horizon Global™ Corp - Printed in Mexico
Sheet 5 of 21
24977NP
07-23-18
Rev. A
Publicidad
