Closemount Style Fan Mounting - Harbor Breeze SPRINGFIELD II Manual Del Usuario

DOWNROD STYLE FAN MOUNTING
5.
If you decided to cut back the lead wires in Step
4, strip 1/2 in. of insulation from end of white
wire. Twist stripped ends of each strand of wire
within the insulation with pliers (not included).
(Fig. 5) Repeat Step 5 for black, blue (if
applicable) and green wires.
6.
Install ball end of downrod (A) into mounting
bracket (C) opening. Align slot in ball with tab in
mounting bracket (C). (Fig. 6)
DANGER: Failure to align slot in ball with tab
may result in serious injury or death.
Continue to "Wiring" instructions on page 12.

CLOSEMOUNT STYLE FAN MOUNTING

1.
Remove canopy cover from bottom of canopy (B).
(Fig. 1) [Note: It may be necessary to use the
handle end of a screwdriver (not included) to
remove the canopy cover by tapping on the
canopy cover from the inside of the canopy (B).]
*Helpful Hint: Closemount style mounting is
more suitable for ceilings lower than 8 ft. (2.44 m)
high. The downrod (A), hanging ball, and canopy
cover are not used in this type of installation.
5
6
1
10
A
C
Tab
Slot
B
Canopy
Cover