Before Initial Use - Beem MD-286BT Instrucciones De Uso

19
WARNING – Danger of Fire
• Do not connect the device along with other consumers (with a high wattage) to a multiple
socket in order to prevent overloading and a possible short circuit (fi re).
Do not use the device in conjunction with extension cables.
•
• Do not operate the device in the vicinity of combustible materials. Do not place any combus-
tible materials (e.g. cardboard, paper, wood or plastic) in or on the device.
• Do not cover the device during operation.
NOTICE – Risk of Damage to Material and Property
• Switch off the device and pull the mains plug out of the plug socket if an error occurs during
operation, when there is a power cut or before a thunderstorm. When you pull it out of the
plug socket, always pull on the mains plug and never the mains cable!
• Never pull or carry the device by the connecting cable.
• Protect the device from other heat sources, naked fl ames, sub-zero temperatures, persistent
moisture, wet conditions and impacts.
• Never place any heavy objects on the device or the connecting cable.
• Use only original accessories from the manufacturer in order to guarantee that there is no
interference that may prevent the device from working and to avoid possible damage.

Before Initial Use

1. Remove all packaging materials and any possible protective fi lms and transport protection.
Never remove the rating plate and any possible warnings.
2. Wipe the device with a clean, damp cloth. Clean the thermal jug (6),
the fi lter holder and the permanent fi lter as well as the measuring spoon with mild detergent
and warm water.
3. Set up the device and connect it (see the "Set-Up and Connection" chapter).
4. Before you enjoy your fi rst coffee, we recommend that you carry out a trial run without coffee
powder to remove any possible production residues on the device and in the water system. To
do this, follow the instructions in the "Handling and Operation" and "Preparation" chapters.
When the device is fi rst used, production-related additives may cause a small amount of
smoke and / or an odour to be produced. This is normal and not a device defect.
5. Repeat this process twice. Do not drink this water!
6. Clean the device and accessories (see the "Cleaning and Care" chapter).
09886_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 19 09886_Inlay_DE-EN-FR-ES-IT_A5_V1.indb 19
EN
26.06.2020 13:27:22 26.06.2020 13:27:22