Setting The Number Of Holes For The Fly Indexer And The Fly Setting Position - Brother RH-9820-02 Manual De Instrucciones

4-2. Setting the number of holes for the fly indexer and the fly setting
position
1
While pressing the PROGRAM key, push the POWER switch to the ON side (1).
0447B
2
[Changing the number of holes for the fly indexer]
Set the memory switch number (2) to "500".
0413B
3
Set the desired number of holes (4).
0414B
4
Apply the changed setting.
0415B
5
・ To change the fly setting position, go to step 6.
・ Once this operation is finished, press the TEST key.
0448B
* The setting range for the number of holes is 2 to 9
(the default setting is 2).
* The display will change from flashing to illuminated, and this means
that the setting has been applied.
RH-9820 FLY INDEXER
(3)
(2) Memory switch number
(3) Setting for selected number
(4) Setting value
(2)
(4)
Illuminates
(Continued on next page)
(2)
(4)
1044B
1045B
0921B
0921B
29