Sub-Zero ICB424 Guía De Uso Y Mantenimiento página 8

Wine Storage Use & Care
Refrigerator Drawers—Model ICB427R
TEMPER TURE CONTROL
For model ICB427R, the refrigerator drawers have their
own microprocessor and control panel located in the top
drawer. The preset temperature is 3°C from the factory,
but you have the option of adjusting the temperature
within the range of 1°C to 7°C. The LCD display on the
control panel displays the actual temperature of both
drawers in your unit.
The key pad on the control panel allows you to
decrease the temperature of the drawers by one degree
each time you depress the key pad. You can raise the
temperature in the drawers by one degree each time you
depress the key pad on the control panel.
L RM FE TURE
For model ICB427R, an alarm will make an audible
beeping sound if a drawer has been left open accidentally.
When the alarm is activated, a symbol will be illumi-
nated in the LCD display of the control panel. When the
alarm is deactivated, the symbol will not be visible.
Temperature Settings
In all instances, the temperature settings are your indi-
vidual preference, and with the wine storage model you
purchased, you can be confident the unit will maintain
those temperatures. chart with suggested storing and
serving temperatures can be found on page 12.
While each temperature zone of your wine storage unit has
a range of 3°C to 18°C, you can set the temperatures at
the exact temperature you think best—whether it's for
consumption or for duplicating the temperatures of cellars
for long term storage.
Wine Storage
WINE STOR GE SHELVES
ll Sub-Zero wine storage models have roller-assembly
shelves with a full three-quarter extension for easy access
to all stored bottles.
IMPORT NT NOTE: Models ICB424 and ICB424FS have
roller-assembly shelves in all instances with the exception
of the bottom stationary shelf.
The shelves have a solid natural cherry wood facing that
can be replaced with other wood to match your cabinetry.
Details on how to replace the shelves' wood facing can be
found in the Sub-Zero design guide.
IMPORT NT NOTE: If you choose to stain or seal the
shelves' natural cherry wood facing, be aware that some
of these substances are hazardous and will damage
stored wine.
Your wine storage unit is intended to maximize the storage
of bottles in an ideal environment where the wine stays in
contact with the cork at an even temperature. Refer to the
illustration for the proper arrangement of bottles on the
shelves.
If you are storing half bottles or magnums, they are
nestled in the shelves in the same manner as the 750 ml
bottles.
When storing magnum bottles you must remove the
shelf just above the intended storage shelf to allow
for these larger bottles to be moved in and out of the
unit. Failure to do so will cause the bottles to break.
Wine storage arrangement. Wine storage shelf removal.
WINE STOR GE SHELF REMOV L
To remove a wine storage shelf, pull the shelf out to its full
extension, gently and evenly lift up on both sides of the
front of the shelf and remove. Refer to the illustration
above. Reverse the procedure to reinstall the shelf.
Be sure to unload all bottles from the wine storage
shelf before removing it.
8