Sub-Zero ICB424 Guía De Uso Y Mantenimiento página 9

Wine Storage Use & Care
Wine Storage
DISPL Y SHELF
Models ICB427, ICB427R and ICBWS-30 feature a display
shelf that allows you to display those prized bottles in your
wine collection. It is illuminated with discreet lighting
mounted in the control panel. The display shelf is
designed so that the wine will stay in proper contact with
the cork. Refer to the illustration below.
IMPORT NT NOTE: The display shelf is designed for only
one row of bottles laid in such a way that the bottom
portion of the bottle is against the wood rail and the top
and cork of the bottle are toward the back of the wine
storage unit.
IMPORT NT NOTE: Models ICB424 and ICB424FS do not
include the display shelf.
Display shelf.
DISPL Y SHELF REMOV L
To remove the display shelf, pull the shelf out to its full
extension, gently and evenly lift up on both sides of the
front of the shelf and remove. Reverse the procedure to
reinstall the shelf.
Be sure to unload all bottles from the wine storage
shelf before removing it.
Refrigerator Drawers—Model ICB427R
DR WER REMOV L
IMPORT NT NOTE: For model ICB427R, you must discon-
nect the control cable before removing the top drawer.
Refer to the illustration below.
To remove a drawer from the model ICB427R, pull the
drawer open until it stops. Lift up evenly on both sides of
the drawer front and pull out, as shown in the illustration
below.
IMPORT NT NOTE: Be sure to unload the contents before
removing the drawer.
To replace a drawer, raise the front of the drawer up and
place onto the drawer slide tracks. Be sure to engage the
front holes of the drawer slide with the small pegs at the
end of each rail.
Before removing the top drawer of the model
ICB427R, you MUST disconnect the control cable.
Drawer removal.
Control cable.
www.subzero.com
Drawer divider.
DR WER DIVIDER
Each drawer of the model ICB427R has a divider that can
be easily removed.
To remove, pull the drawer divider forward and pivot the
back edge of the divider away from the back of the
drawer. Reverse the procedure to reinstall the divider.
Refer to the illustration above.
9