"Boost" Mode; I Settings That Can Be Accessed In Configuration Mode; Accessing Configuration Mode - Zodiac eXPERT Manual De Instalación Y De Uso

4.2.3. "Boost" mode
In some cases, the pool may require a higher than normal chlorine level, for example during times of high use, bad
weather or at the start of the pool season. "Boost" mode is used to quickly increase the chlorine level. It operates for
24 consecutive hours at a 100% production rate.
When the filtration pump is connected to the appliance, the chlorination and filtration timers are temporarily ignored
throughout the duration of the "Boost" mode. Once deactivated, the appliance and the filter pump resume the
programmed operations.
To activate the "Boost" mode:
• Press five times : "BOOST OFF" is displayed on the screen.
• Press to activate the mode: "OFF" flashes.
• Press or : "24 h" flashes.
• Press to confirm.
• Press to exit.
• When "Boost" mode is active, the blue circle representing actual chlorination will flash and spin.
• "Boost" mode can be stopped at any time by applying the procedure above.
4.3 I Settings that can be accessed in Configuration mode
4.3.1. Accessing Configuration mode
• From the home screen, press
• Press for 5 seconds. The "Config" icon appears.
to reduce chlorine production to 0%.
Home screen
Configuration mode activated
(chlorinator type & power is
shown on the screen)
EN
24