Fan Coils - AERMEC VMF-RCC Manual Del Usuario

E5 panel technical specifications
1 Date
DATE TIME: day of the week, dd/m/yy, h:min:sec.
SEASON: indicates the system functioning mode (
FAN COILS: this section shows the fan coil status; the
one fan coil is functioning.
POWER: the bar graph indicates the cooling capacity percentage that is instantaneously
requested by the fan coils to meet load requirements. If there are no fan coils in the
system, the graph will not be shown
ALARM: the appearance of an alarm is highlighted by the presence of a bell that rings
. This indication highlights that the alarm has just occurred and the alarms memory
has not be consulted in order to identify the origin. The reading of the alarms log makes
the state of the bell change instantly
that caused it to appear has been restored
TIME PERIODS: the
one fan coil (area) or for the DHW.
Only during display of the main page is the On/Off (
takes place if the control is pressed for at least 5 seconds. From the main page it is possible to
access the menu selection screen, by pressing at least one of the
Back-lighting
The display mounted in the VMF-RCC panel has back-lighting that is normally off. To activate it,
press the relevant keys. It will remain on throughout the panel use. Switch-off takes place after
30 seconds of inactivity.
The LCD lighting is on also with an alarm event in order to emphasize it and draw the user's
attention. The back-lighting switches off after 30 seconds of inactivity also in this case. The
alarm remains indicated by a flashing red LED present at the side of the display.
60 2104_2696105_00
09/08/2017 Author
icon appears if the user sets an hourly program for at least
F. Carpanese
winter,
. The icon disappears only after the anomaly
) key active. The system state change
Code
Type indoor
summer).
icon will appear if even just
keys.