AERMEC VMF-RCC Manual Del Usuario página 97

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

E5 panel technical specifications
1
Date
To enter the control type modification mode, press the
denied display of the string. To change the value, act on the increase (
keys. The data is confirmed by pressing the enter (
eeprom is highlighted by the disappearance of the denied display.
Press the ESC key for the system to display the menu page.
Using the Page Up and Page Down keys, scroll the pages contained in the sub-menu
G
-
ENERATOR STAND
BY DELAY FROM FAN COIL THERMOSTAT PAGE
Use this page to enable and/or disable the possibility of switching off the chiller after a pre-fixed
time if all fan coils have been switched off from the thermostat to reach the values set for the
single rooms. The acceptable values range from 0 to 120 min.Level: user.
HYSTERESIS
HYSTERESIS:
(delay = 0) indicates that the chiller block cannot be enabled
(delay > 0) indicates that the chiller block function is enabled
09/08/2017
Author
F. Carpanese
key. This state is highlighted by the
) key, while the effective memorisation in
Code
Type
indoor
) and decrease (
DELAY
2104_2696105_00
)
97

Publicidad

Tabla de contenido
loading

Tabla de contenido