AERMEC VMF-RCC Manual Del Usuario página 66

Edition 1 Date
ATTENTION:
if the setpoint lock is selected and/or a functioning mode is forced, the lock status will be notified on
the terminal on the machine:
- VMF-E2 = white led flashing;
- VMF-E4 = the padlock icon will be displayed
The winter and summer ambient sets can be edited and stored in the eeprom module for every
fan coil. If the "functioning mode" parameter is set in WINTER, the system envisions the use of
the data inherent the winter season, vice versa in the summer. This way of operating makes it
easier for the user, who does not have to worry about re-programming all of the areas on
season change-over.
To enter the temperature set editing mode, press the
no parameter is displayed. To change the value, act on the increase (
keys. The data is confirmed by pressing the enter (
eeprom is highlighted by the disappearance of the denied display.
Press the ESC key for the system to display the menu page.
Using the Page Up and Page Down keys, scroll the pages contained in the sub-menu.
F
AN COIL PROGRAM PAGE
In this page it is possible to read and/or modify the scenario that is associated to the fan coil in
order to enable its functioning in determined time periods of the day. The programs that can be
associated to the fan coils are managed within the TIME PERIODS MENU.
To enter the program editing mode, press the
parameter is displayed. To change the value, act on the increase (
66 2104_2696105_00
09/08/2017 Author F. Carpanese
key. This status is highlighted when
) key, while the effective memorisation in
key. This status is highlighted when no
Type indoor
) and decrease (
) and decrease (
)
)