AERMEC VMF-RCC Manual Del Usuario página 70

Regulation and Control Service
Project VMF-RCC panel
Electronic adjustment
Subject
Document E5 panel technical specifications
Edition 1 Date
DHW
SET PAGE
On this page,
 the "Water temperature" parameter, namely the temperature set for DHW, can be viewed
and or edited. The range of acceptable values is 0 ÷ ("Chiller set for DHW" – "Heat
differential" ) [°C].
 functioning according to daily time periods for domestic hot water. If the "DHW program"
is set to ON, only the scenario described under "DHW PRG" in the time periods menu
may be associated to DHW.
 "On/Off Band", namely the hysteresis between the maximum and minimum temperature
that DHW can assume. The range of acceptable values is 0 ÷( "Chiller set for DHW" –
"Heat differential" - "Water temperature")[°C]. This parameter is used in concomitance
with the "Water temperature" to establish the switch-on and switch-off thresholds of the
production of DHW.
To enter the data editing mode, press the
is displayed. To change the value, act on the increase (
is confirmed by pressing the enter (
highlighted by the disappearance of the denied display.
Press the ESC key for the system to display the menu page.
Using the Page Up and Page Down keys, scroll the pages contained in the sub-menu.
70 2104_2696105_00
File
09/08/2017 Author
) key, while the effective memorisation in eeprom is
SpecificheTecnicheVMF_RCC(Ed0)_EN.doc
F. Carpanese
key. This status is highlighted when no parameter
) and decrease (
Page 18/61
Code
Group
Code
Type indoor
) keys. The data