AERMEC VMF-RCC Manual Del Usuario página 87

Electronic adjustment
E5 panel technical specifications
1 Date
The ADD key can only be pressed if the self-addressing procedure of the thermostats is
not active; this key forces the display of the modbus addresses associated with the thermostats
of the fan coils.
Press the ESC key (active only if the self-addressing procedure is not enabled) for the
system to display the menu page.
Use the Page Up and Page Down keys (active only if the self-addressing procedure is not
enabled) to scroll the pages contained in the sub-menu.
S
YSTEM NETWORK STATE PAGE
In this page it is possible to control the state of the serial communication of the network. The
graph is built dynamically in relation to the elements present in the system. The figure shows an
example in which the network is connected to a chiller, a DHW and 64 fan coils. Level:
super_user.
The system can establish the state of communication of the individual element as it counts the
number of controls to which it has not received any request. The icons, therefore, will change
status if the panel does not receive a response to several reading commands. When the first
command has been concluded correctly, the icon will display the element shown again.
CHILLER:
excellent communication status
not connected to the network
DHW:
09/08/2017 Author F. Carpanese
Group
Code
Type indoor
HEAT PUMP, DHW, VMF-CRP,
VMF-REB
FANCOILS
MZC PLENUM
2104_2696105_00
87