AERMEC VMF-RCC Manual Del Usuario página 83

Regulation and Control Service
Project VMF-RCC panel
Subject Electronic adjustment
Document E5 panel technical specifications
Edition 1 Date
• LOCAL = the functioning mode (AUTO, V1, V2, V3, AUX)can be edited from the terminal on
the machine (VMF-E2 or E4);
• AUTO = AUTO functioning mode will be set. This mode cannot be edited from the terminal on
the machine (VMF-E2 or E4);
• V1 = V1 functioning mode will be set. This mode cannot be edited from the terminal on the
machine (VMF-E2 or E4);
• V2 = V2 functioning mode will be set. This mode cannot be edited from the terminal on the
machine (VMF-E2 or E4);
• V3 = V3 functioning mode will be set. This mode cannot be edited from the terminal on the
machine (VMF-E2 or E4);
• AUX = AUX functioning mode will be set. This mode cannot be edited from the terminal on the
machine (VMF-E2 or E4);
ATTENTION:
if the setpoint lock is selected and/or a functioning mode is forced, the lock status will be notified on
the terminal on the machine:
- VMF-E2 = white led flashing;
- VMF-E4 = the padlock icon will be displayed
For the zones served by MZC plenums, the AUTO/V1/V2/V3/AUX modes involve forcing them
to be enabled to function.
To enter the temperature set editing mode, press the
no parameter is displayed. To change the value, act on the increase (
keys. The data is confirmed by pressing the enter (
eeprom is highlighted by the disappearance of the denied display.
Press the ESC key for the system to display the menu page.
Using the Page Up and Page Down keys, scroll the pages contained in the sub-menu.
File
09/08/2017 Author
SpecificheTecnicheVMF_RCC(Ed0)_EN.doc
F. Carpanese
key. This status is highlighted when
) key, while the effective memorisation in
Page 31/61
Code
Group
Code
Type indoor
) and decrease (
2104_2696105_00
)
83