Luminance Brands Kathy Ireland Home RIPTIDE CF605BQ00 El Manual Del Propietario página 20

5. How to Wire Your Ceiling Fan
5.7
S e c u r e l y c o n n e c t t h e R e c e i v e r B l a c k W i r e
(TO MOTOR L) to the Fan Motor Black Wire using the
18 ga . Wire Connector (supplied with the receiver)
(Figure 28) .
5.8
Securely connect the Receiver Blue Wire (TO LIGHT)
to the Fan Motor Blue Wire using the 18 ga . Wire
Connector (supplied with the receiver) (Figure 29) .
Position the Antenna Wire on top of the Receiver . Slide
the RCFP Receiver completely onto the Hanger Ball,
nestled in the Hanger Bracket (Figure 29) .
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the supply circuit ground wire.
Do not operate fan until blades are in place.
Noise and fan damage could result.
NOTE: Failure to properly connect the Receiver
Wires will damage the device and render it non-
operable.
Figure 28
Figure 29
20
(Continued)
18 ga. WIRE
CONNECTOR
FAN & RECEIVER
BLACK WIRES
18 ga. WIRE
CONNECTOR
FAN & RECEIVER
BLUE WIRES
U.L. Model No.: CF605