PROTEOR MATIK Instrucciones De Uso página 9

Load line
Dynamic alignment:
-
Stability
The threaded M36×1.5 adapter for the KD version does not accommodate any alignment adjustment. The socket must therefore be
made accordingly.
Check the alignment using suitable equipment (line laser, plumb line, etc.)
INSTRUCTIONS FOR USE
Heel H
≈ 1/3
+
Stability
Greater trochanter
The load line passes between 0 and 10 mm
(0 is recommended) in front of the knee
joint axis (the theoretical axis of rotation of
the knee).
Aligning the foot:
Refer to the instructions for the
foot
≈ 2/3
1- To increase the stability, incline the knee as indicated
(to move the instantaneous centre of rotation to the rear)
by adjusting the proximal and distal connectors.
To reduce the stability, incline the knee in the opposite
direction.
2- Then reposition the foot, in accordance with the
recommended alignment, by adjusting the connectors
between the knee and the foot.
Page 3 of 5