Technical Features - Specifications To Assemble Your Carrier - Bobike one mini Manual Del Usuario

EN
SPECIFICATIONS TO ASSEMBLE YOUR CARRIER
CAUTION
How and where the carrier is to be attached to the bicycle.
1,38 in
(35 mm)
MAXIMUM
CHILD WEIGHT
Ø 0,87 to 1,10 in
33 lbs (15 kg)
Ø 22 to 28 mm
• This baby carrier must not be mounted to bicycles fitted with
rear shock absorbers.
• This baby carrier must not be mounted to a racing bicycle
with drop handlebar.
• This baby carrier must not be mounted to Motorized Vehicles
such as Mopeds and Scooters.
• This baby carrier must not be mounted in bicycles with trian-
gular, square or carbon fiber frames.
• This front baby carrier must be assembled on bicycles with
round and oval frame head tube with diameters ranging
from Ø 0,87 to 1,10 in (Ø22 to Ø28 mm).
• The baby carrier must be assembled on bicycles with wheels
with diameters of 26" - 29".
• This baby carrier is only suitable for carrying children with a
maximum weight of 33 lbs - 15 Kg (and children with recom-
mended ages ranging from 9 months to 3 years of age - with
the weight as the decisive variable).
• The total weight of the cyclist and the child transported must
not exceed the maximum permitted load permitted for the
bicycle. Information on the maximum load can be found in
02. TECHNICAL FEATURES
OK NOT OK
COMPATIBLE NOT COMPATIBLE
FRAMES FRAMES
ROUND OVAL SQUARE TRIANGULAR
WARNING
NOT OK
NOT COMPATIBLE BICYCLES
CARBON
FIBER
CARBON FIBER
the operating instructions of the bicycle. You can also contact
the manufacturer for this question.
• The carrier may only be mounted on a bicycle suitable for the
attachment of such additional loads.
• The position of the baby carrier must be adjusted so that the
bicycle rider does not touch the baby carrier with the feet
when in motion.
• It's very important to adjust correctly the carrier and its com-
ponent parts for optimum comfort and safety of the child. It's
also important that the carrier does not slope forward so that
the child does not tend to slide out of it. It's also important
that the backrest slope backward slightly.
• Check if all parts of the bicycle function correctly with the
baby carrier mounted.
• WARNING: Front seats reduce the maneuverability of the bi-
cycle
• Check the instructions of the bicycle, and If you have
any doubts on fitting the baby carrier to your bicycle,
please contact your bicycle supplier for further infor-
mation.
4
DROP HANDLEBAR REAR SUSPENSION
SHOCK ABSORBER
MOTOR (MOPEDS
AND SCOOTERS)