Bobike one mini Manual Del Usuario página 7

FITTING THE CARRIER ON THE BICYCLE
5
Having concluded the previous steps make sure that the frame holder (E) is secure and properly aligned with the handlebar
and the wheel. The frame holder (E) must be fitted as low as the steering tube allows.
6
E5.1
To assemble the Baby Carrier insert the two ends of the steel rod (A1) of the Carrier into the corresponding holes (E5.1) of the
Frame Holder Body (E5).
You will hear a slight click when the operation is complete, and you will see that the ends of the steed rod (A1) appear
beneath the Frame Holder (E).
Make sure the child seat is upright.
03. ASSEMBLY INSTRUCTIONS
A1
E5
E
7
EN
E5
A1