Scaler Standard/With Led Light (Optional); Scaler Operating Precautions; Venturi Saliva Ejector - Olsen DENTAL LINE Manual Del Usuario

3.3 - Scaler Standard/with LED Light (Optional)

The scaler has an ultrasonic generator electronic board
that, through the piezoelectric system, provides the tip vibration,
giving a high-frequency condition. When the scaler is triggered,
it starts the tip vibration, activates the LED and opens the water
passage for cooling. Vibration power and water flow control for
cooling can be adjusted through individual controls.
Dental applications of this instrument: scarification, root
planning, root canal treatment, cavity, and periodontal
preparation. These tips come with the scaler: GD1, PD1, and PD3.
Technical Features:
− Frequency: 28 kHz ± 3 kHz;
− Power supply: 24 VCC;
− Output force (half-displacement): <2N;
− Power Rating: 3 to 20 W;
− Operation mode: continuous;
− Tip vibration displacement: ≤100 μm.

3.3.1 - Scaler Operating Precautions

− Check out the vibration outside the patient's oral cavity before use. If any abnormality is found, discontinue
use immediately and contact a certified Olsen assistance;
− Always use gloves to touch the scaler and its components. Always remove the tip of the scaler, before
removing the transducer covers;
− Use only the Torque wrench and Endo wrench to fix and remove tips. If the tip is not fixed properly, it will
present vibration loss;
− This scaler has been developed for professional dental use only and should not be used for any other
purpose;
− The tip wears out with use, this can cause a reduction of power. If this occurs, replace the tip;
− Do not sharpen or bend the tip. Tips can be damaged and do not generate enough vibration;
− While in use, the scaler system may affect computers and LAN cables. During an operation next to radio
device, interference may be heard;
− Use only autoclave proper for dental use to sterilize tips, wrenches, transducer and LED;
− Respect the maximum operating power of the tips used with scaler. The use of power above the
recommended will cause damage to the tip and scaler;
− Keep it away from patients with cardiac pacemakers or anesthetized;
− During the scaler use, the tip temperature may rise if the spray is not used. Always use enough spray water
for the cooling of the handpiece and the teeth;
− Use the device only on the teeth. Contact with skin, gums and mucous membranes may cause injury;
− Keep the scaler away from explosives and flammable materials;
− Do not submit the handpiece to any strong impact or drop it;
− Do not use it on metal, or ceramic, porcelain or resin prostheses;
− Do not touch and do not wet the back of the transducer, where there are electrical connections to the
power cord. This can result in electric shock;
− Do not force the scaler cable when removing it. This may cause disconnection.

3.4 - Venturi Saliva Ejector

The Venturi device (1) uses the compressed air from the air
compressor to generate suction. It has a solids collector (2) and allows the
coupling of  6,3 and 9,5 mm cannulas through removable adapters (3).
It can present a quick connection (4) for hose, making easier to
remove the device for cleaning.
Note: the quick connection and the solids collector is an optional item that
can be installed to any hoses of the Venturi and Vórtice ejectors.
18