The Olsen Dental Set is intended for use in general dental applications, providing the dental professional
with a user interface to control the operation of the dental chair and connected dental devices.
The Olsen Dental Set provides air, water, electricity and vacuum to allow the intended operator an intuitive
control center for all common and normal patient care procedures performed by the dentist / dental assistant.
The reproduction and distribution of these instructions can only be made with prior permission from Olsen
Indústria e Comércio S.A.
The technical features of the products described in this manual correspond to the time of its publication.
Future technical improvements do not result in any right to update existing products.
The images presented in this manual and in the operation guide are for illustrative purposes.
This equipment is designed to be free from interference from magnetic fields, external electrical influences,
electrostatic discharges, pressure or pressure variation, provided that the equipment is transported, installed,
operated and sanitized in accordance with the instructions for use contained in this manual.
The estimated lifespan of this equipment is 5 years.
Hydropneumatic diagrams, electrical diagrams, installation instructions or other technical information
necessary for the installation and maintenance of the Olsen Dental Equipment will be made available upon
request, through our email: posvenda@olsen.odo.br or by phone: +55 (48) 2106 -6000.
10.1 - General Cares - Compulsory Reading
Follow the instructions in chapter 5 of this manual (Installation Requirements) to suit the electrical
and hydraulic network where the equipment will be installed.
Follow instructions for proper use of the equipment and its accessories as described in Operation
Guide. Improper use could be harmful to equipment, which would not be covered by warranty.
Clean the equipment according to the instructions in chapter 7 (Cleaning and Disinfection) of this
manual.
Before starting the office, check the conditions of the compressor, observe its operation until its
first automatic shutdown. Then close the air reservoir drain.
At the beginning of activities, check the autoclave.
Protect your equipment from direct exposure to sunlight. Direct exposure of the equipment to
sunlight may cause premature aging of plastic covers and upholstery.
Check daily and perform drainage if necessary, from compressor and equipment moisture filters
such as vapor drain, prophylaxis system filter, compressed air line filter, before using the equipment.
Observe the equipment's external corrugated hoses by positioning them to prevent them from being
crushed during the automatic chair movement commands.
To isolate the equipment from the main power, disconnect the main circuit breaker from the
equipment's mains power supply.
Do not allow objects, equipment parts, or stool castors to rest on the hoses. This may cause damage
to the equipment and impair its proper operation.
The mains cable and the scaler transducer are designed for exclusive use on the Olsen's Dental Unit.
The use of these components in other equipment or other those activity not specified (chapter 8 -
Technical Features) might compromise their emissions and electromagnetic immunity.
Only the authorized technician can replace this equipment's mains cable and internal fuses.
This equipment is not suitable for use in the presence of a flammable anesthetic mixture with air,
O
or Nitrous Oxide.
2
This equipment is not suitable for use in an oxygen-rich environment.
10 - Important Notes
36