Brandt BOP7542X Instrucciones Para El Usuario página 73

Caring for your device
• Cleaning the door windows
Open the door completely and block it using the plastic cable provided in the plastic pouch of your device.
Remove the first clipped window: use a tool (screwdriver) in the slots (A) to unclip the window and then
remove it.
Important: Important:
Be sure to mark the mounting direction of this 1st window (glossy side towards you).
Depending on the model, the door is made up of two additional panes with a black rubber spacer at each
corner. If necessary, remove them for cleaning.
Do not immerse the windows in water. Rinse with clean water and wipe with a lint-free cloth.
A
A A
• Reassembly of the door windows
After cleaning, reposition the four rubber stops arrow up and reposition all of the windows.
Engage the last window in the metal stops, then clip it, shiny side towards you. Remove the plastic cover.
Your device is operational again.
32
A
A A