Evaporative Cooling System
Some applications of the H2 Cool System require a 12" Offset Support Bracket to allow for movement of curtains
either directly behind or directly in front of the cool cell system. Figure 9 above depicts the void that can be
generated by utilizing the Offset Brackets (8490180700) over the standard brackets (HSES-27).
Due to the weight of the system being extended from the building a minimum on center bracket
spacing of 4 feet is recommended.
Additional wood supports may be required below recommended 2"X10" to allow for the extended
length of the mounting section of offset brackets. A 2"X4" is shown installed below the 2"X10" in
Figure 6 above.
Hog Slat Inc. Newton Grove, NC USA November 2018
Figure 9
OFFSET BRACKETS
11