Exit Plumbing Instructions (In Line Jet Pump) - Hog Slat Grower SELECT HSES Manual De Instalación

Evaporative Cooling System
1. Starting with the pump exit, assemble the components as shown below in Figure 22 and 23, using the
PVC pipe cleaner and PVC cement supplier with the Plumbing Kit. Both Center Feed and End Feed
arrangements are shown below.
Please note: 115 Volt pump installation may require a variation in installation.

In 115 Volt Pump installations, the 2" Pump Union (H2P-004) is replaced with a 1 ½" Pump Union
(H2P-003).

The required components are included in the corresponding pump kits.
Hog Slat Inc. Newton Grove, NC USA November 2018
Figure 22
IN LINE JET PUMP
Exit Plumbing Instructions
Figure 23
19