Roche ACCU-CHECK Guide Me Instrucciones De Uso página 41

Wireless Communication, Meter Pairing, and Data Transfer
Transferring Data Using a USB Cable
This feature allows you to transfer data from your meter to special software for diabetes management on
a PC using a USB cable.
1
Plug the small end of the
USB cable into the meter.
4
The meter transfers the data
to the software.
2
Plug the large end of the USB
cable into a USB port on the PC.
If the meter is off, it turns on.
NOTE
The USB cable does not charge the meter's batteries. Remove the
USB cable after you have finished.
3
Start the diabetes
management software on
the PC and initiate a data
transfer.
6
39