Meter and Lancing Device Cleaning and Disinfecting
7
How to Clean and Disinfect the Lancing Device
WARNING
Failure to follow these instructions may damage the lancing device and stop it from working
properly.
• DO NOT get any moisture into any openings.
• Always use the same product for both cleaning and disinfecting.
1
Wash hands with soap and
water and dry thoroughly.
4
Wash hands with soap and
water and dry thoroughly.
46
2
Wipe the entire surface of the
lancing device and the inside of
the cap with a Super Sani-Cloth.
3
A separate Super Sani-Cloth
should be used for cleaning and
disinfection. For disinfecting the
lancing device, use a new cloth
and repeat step 2 making sure
the surface stays wet for
2 minutes.