Cleaning And Storage - Mitchell & Cooper crustastun CS01 Instalación Y Manual De Instrucciones

WARNING
DISCONNECT FROM MAINS POWER
BEFORE CLEANING.
REMOVE TRAY AND SPONGE
01
Remove the sprung tray from the tank and
the sponge from the lid. Rinse the sponge
with fresh water and squeeze out excess.
CLEAN
02
Wipe the internal and external
surfaces with a clean, damp,
non-abrasive
antibacterial surface cleaner. Never use
abrasive cleansers, metal tools or steel
scouring pads. Dry with a soft cloth.
If the top stainless steel electrode is dirty or
seriously discoloured, to the extent that it is
effecting performance, it should be cleaned
with a non-metallic kitchen scouring cloth.
Take care not to scratch the surrounding
black plastic.
STORE
03
After cleaning the sprung tray and the
sponge, put the tray back in the tank. Place
the sponge on top of the tray and close the
lid. Ensure the hose is fully drained and the
valve left open.
NOTE
DO NOT HOSE DOWN UNDER ANY CIRCUMSTANCE.
FAILURE TO COMPLY WILL VOID THE WARRANTY.
cloth and

CLEANING AND STORAGE

12