Mitchell & Cooper crustastun CS01 Instalación Y Manual De Instrucciones página 6

INSTALLATION
Crustastun electro-stunners are produced with quality workmanship and materials by
Mitchell & Cooper Ltd. Proper installation, use and maintenance according to these
instructions will result in many years of satisfactory performance.
Ensure that the Crustastun is placed on a flat, dry surface.
• Place it away from direct sources of heat.
• Before plugging unit into mains, ensure that the voltage selector is set to the correct
setting for your region.
• Plug the power lead into the power inlet and mains socket.
• The green standby light will illuminate on the front of the unit.
THIS EQUIPMENT MUST BE PROTECTIVELY EARTHED. ENSURE THAT THE VOLTAGE SELECTOR
IS SET TO THE CORRECT SETTING FOR YOUR REGION. INCORRECTLY SETTING THE VOLTAGE
MAY CAUSE DAMAGE TO THE CRUSTASTUN. THE VOLTAGE SELECTOR IS PRESET TO THE
SETTING INDICATED ON THE PRODUCT RATING LABEL.
To access the voltage selector switch, remove the
voltage selector cover. Ensure the switch is set to the
correct setting for your region and replace the cover.
230 for 220-240V 50-60Hz AC ONLY
115 for 110-120V 50-60Hz AC ONLY
POWER LEAD
SOCKET
IMPORTANT
5
VOLTAGE SELECTOR
COVER FIXING SCREW
VOLTAGE SELECTOR
COVER