Unpacking The Product; Placing The Units; Before You Start - Oregon Scientific GR101H Manual Del Usuario

UNPACKING THE PRODUCT

When you unpack your product, make
sure to keep all the packing materials in
a safe place, in case you need to later
transport or return it for servicing. In the
box, you will find:
Scale Unit
8x AA Batteries
User Manual
Bod y Fat Monito r
With Wireless Remote Displa y
M ode l: G R1 01
User Manual

PLACING THE UNITS

The Scale and the Remote Monitor
should be within 8 metres of each other,
in order to ensure proper reception.
Remote Monitor Installation
Mount or place the Remote Monitor on a
wall or a flat surface as shown below. For
best results, it should be located within 8
meters of the Scale. Avoid obstructions
such as walls or heavy furniture.
Remote Unit
4x Carpet Feet
Warranty Card
Scale Placement
For best results, place the Scale on a flat,
even surface. Use the supplied carpet
feet if the Scale is to be placed on carpet.
NOTE
Leave the Scale on the floor for 5
seconds to allow for self-calibration.

BEFORE YOU START

1. Install the supplied batteries into both
the Scale and Remote Monitor.
3
1
2