Installation In Booster Mode; Important - Britax DUALFIT Guia Del Usuario

BRITAX Child Safety, Inc.

Installation in Booster Mode

Lower Anchors
Before you begin:

IMPORTANT:

It is not necessary to use lower anchors or
tether to position this child restraint in booster mode� To
use this seat in booster mode without lower anchors, see
instructions for Securing Your Child on page 18�
IMPORTANT: Use lower anchors only to position this
child seat in your vehicle seat� Secure your child using the
vehicle's lap-shoulder belt system�
• Check that your vehicle has lower anchors�
• Check that your vehicle has a top tether anchor�
• Loosen the tether and place it over the child seat
back to keep it from becoming pinned between the
child seat and vehicle seat during positioning�
• Adjust the child seat to the upright position and place
forward facing on the vehicle seat�
1� Pull seat cover and seat
pan forward to access
lower connectors�
2� Route the lower connector
strap along the green
belt path and firmly press
the lower connectors
onto their adjacent lower
anchors� A click confirms
attachment�
NOTE: Verify that the strap
is not twisted.
3� Pull the end of the lower
connector strap to remove
slack�
16
4� Firmly press the tether
hook over a designated
vehicle tether anchor�
Remove slack�
5� Secure excess webbing
with the elastic strap�
DUALFIT User Guide
Or
Or
17