2. Safety
2.10- Safety devices on board the machine
In the development of the design, fixed safety protections have been adopted in
hazardous areas of operation. All guards are shielded to prevent access to risky points.
This measure aims to guarantee protection to operators and other people involved with
the operation of this machine.
Never use the machine without the safety guards! Replace damaged safety shields
immediately!
NOTE!
In accordance with Regulatory Standard NR-12, "fixed protection" is considered to be
the element specifically used to provide safety through a physical barrier. It must be
held in its position permanently or by means of fastening elements that only allow its
removal or opening with the use of tools.
A - Safety protections of the couplings:
Designed to prevent contact with couplings
during machine operation.
Risks of removal of this protection:
Contact with moving couplings (A) may cause
serious injuries such as fractures, kinks, etc.
A
B - Internal grids of the reservoir
B
Developed to prevent contact with agitators
during machine operation.
B
Risks of removal of this protection:
Contact with moving agitators (B) may cause
serious injuries such as fractures, kinks, etc.
18
Instructions Manual