Functioning; Required Tractor - Nogueira SOFT DUO 1300 Manual De Instrucciones

3. Presentation

3.3- Functioning

ƒ The spreader coupled to the tractor is positioned at the distribution site.
ƒ The distribution height is adjusted by operating on the three-point hydraulic lift
system of the tractor.
ƒ The power take-off of the tractor which transmits rotational movement to the two
launching rotors is switched on.
ƒ The tractor remote control valve is activated and the hydraulic cylinders are actuated
to open the doser bottoms, releasing the product flow over the two rotors.
ƒ As the tractor moves in a straight line, the two rotors launch the product, forming
an application range along the distance traveled by the tractor.
NOTE: You can suspend the operation of one of the rotors simply by closing the
corresponding hydraulic cylinder register.
NOTE!
t
he weather conditions have a big influence on the
distribution profile during the spreading
the weather should be dry
and a maximum wind speed of

3.4- Required Tractor

The choice of tractor must take into account the
power required by the machine and the lifting
capacity of the three-point hydraulic system
to support the gross weight of the equipment
(machine weight plus product weight to be
distributed).
The tractor used must have a minimum lifting
capacity of 1800 kg in the center of mass (at 610
mm of the ball joints according to ISO 789-2) - see
figure on the side.
NOTE!
n 1800
ote that kg is related to the weight of the
machine plus its load capacity
24
. i
deally
,
with low air humidity
3 / .
m s
.
Instructions Manual
,
The center of mass distance
is 610 mm from the spherical
joints to the tractor lift arms.
610 mm