6.5.1- Daily cleaning
Remove any crop residues from your machine.
Do a thorough wash. Dry any water accumulated
in the machine guards.
Hydraulic components should only be cleaned
with low pressure water jets to avoid damaging
the seals.
Neutral Ph cleaners offer optimum machine
protection. Products with very low or very high
Ph may be corrosive when used on plastic or
rubber surfaces.
To remove the reservoir for cleaning , see "HOW
TO REMOVE THE RESERVOIR '
It is recommended to perform, at the end of each
season, a machine general overhaul at your dealer
or at the factory.
Do a completely and rigorously machine
washing.
While cleaning the machine, you can
easily get in touch with the product.
Gearbox
Wear protective clothing, gloves, goggles
and safety shoes. Protect your body and
face against splashes of dirt and debris.
Insufficient body and face protection
can cause severe skin and eye damage.
In these cases, seek immediate medical
attention!
Read the product manufacturer's
instructions carefully and follow the
instructions.
Contact with certain products can cause
injury.
CAUTION!
Instructions Manual
6. Maintenance
67