Nogueira SOFT DUO 1300 Manual De Instrucciones página 136

4. Preparation
IMPORTANT!
r
emove the grids and cones while desired spread
.
limestone
1.
Remove the two protective grids (A) together
with the cones (B) (see 'HOW TO REMOVE THE
PROTECTIVE GRIDS');
2.
Remove the two agitators of the machine by
turning them as shown in the figure to the
side;
3.
Mount the two rings (C) - the rings are the
same. Secure them in the holes where the grids
were mounted using the 2 bolts (P) provided
with the limestone kit;
(P) Hex. bolt M8 x 25 (02 per ring)
4.
Mount the two agitators, observing the right
and left sides, as indicated on the previous
page.
5.
Attach the agitators to the rotor shafts using
the bolts and washers (F) supplied with the
kits.
right rotor:
Hex. bolt M12 x 25
Flat Washer M12
left rotor:
Hex. bolt M12 x 25 (left-hand thread)
Flat Washer M12
IMPORTANT!
• N
ever use limestoNe agitators to distribute
graNular fertilizers or seeds
damage these types of products
48
B
.,
it will
.
Instructions Manual
F
P
A
P
C