Important - Harbor Breeze BRD48BNK6LRS Manual Del Usuario

OPERATING INSTRUCTIONS
2. Restore electrical power. Within 30 seconds of
restoring electrical power, press and hold the "0"
button on the remote control transmitter for 5 seconds
or until light on the fan blinks twice. Use the remote
control transmitter to test the light and fan functions to
confirm the learning process is complete.
NOTE: Remove protective covering from front of
remote control transmitter and discard.
IMPORTANT: To prevent damage to remote control
transmitter, remove the battery if not used for long
periods. Store the remote control transmitter away
from excess heat or humidity.
3. Operation buttons on the panel of the remote control
transmitter:
3 button
2 button
1 button
0 button
button
Tap button quickly to turn lights off or on. Hold
button down to increase or decrease lights. If you
press button in excess of 0.7 seconds, it
becomes a dimmer. The lights vary cyclically in
8 seconds. The light button has an auto resume
function, which keeps the light at the same
brightness as the last time it was turned off.
4. Use the fan reverse switch, located on the top of the
motor housing (D), to optimize the fan for seasonal
performance. A ceiling fan will allow you to raise
your thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
CAUTION: Turn fan off at wall switch and let
blades (G) come to a complete stop before manually
activating the reverse switch.
for fan HIGH speed
for fan MEDIUM speed
for fan LOW speed
to turn fan OFF
to turn light ON or OFF
2
Remote Control Transmitter
3
Remote Control Transmitter
4
G
18
D
Reverse Switch