Berkel BV 400/25 Manual De Uso Y Mantenimento página 2

Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 – BV 400/25H – BV 600/60
Rev. 01 - 04/2019 - Cod. 1500656 - Instruction manual for vacuum chamber packaging machines Mod. C46-C46H-C62
The vacuum packing machine has been studied and designed to vacuum bags and rigid
containers, with a complete standard cycle (vacuum and seal) being performed every
60 seconds.
It is prohibited to use the appliance in a manner or for a purpose other than those in-
dicated by the manufacturer in this manual. Proper use of the appliance also includes
compliance and awareness of the instructions and warnings contained in this instruction
manual, as well as the timely implementation of all inspections, servicing and cleaning
of the appliance.
STrICTly CoMPly wITH THE followINg SafETy guIdElINES:
• Before use, make sure the machine is intact and bears no signs of damage.
• If the machine is not used for a long period of time, it must be switched off from the
main switch.
• Prevent unauthorised persons from accessing the work area.
• Use suitable work clothes and protection gloves.
• Never use the machine in potentially explosive environments, or in the presence of
flammable vapours and gas.
• Make sure there is sufficient ventilation in the workplace.
• Immediately remove all obstacles and interference that can compromise safety.
daNgEr!
• only trained personnel can use the machine. Such personnel must be aware
of the safety Standards and user Instructions contained in this manual.
• This machine can be used by children over the age of 8, by persons with
reduced physical, sensory or mental capabilities, as well as by persons lacking expe-
rience and expertise who have been given supervision or instructions to ensure safe
use of the machine and after having explained the risk (or dangers) associated with it.
daNgEr!
• Before every appliance start-up, check that all the protection and safety
devices are present, efficient and functional.
ElECTrICal rISkS - ElECTrICal HaZard
• The electrical safety of the machine is only guaranteed when it is con-
nected correctly to an efficient earthing system in accordance with the law.
• Only qualified personnel can operate on the power supply system and
access live parts.
• Perform regular inspections of the electrical system of the machine (these are only
to be performed by qualified personnel).
• Remove and/or immediately replace loose connections or burnt wires (only qualified
personnel must replace these parts).
• Replace the power supply cable if damaged. Only qualified personnel must replace
this part.
2