Festo HSP-AE-IO Serie Manual De Instrucciones página 20

Menu command Description
[Diagnostic]
[Pos.set table]
[Limit param]
[System param]
[Software
information]
1) 2)
[Positioning]
[Move pos. set]
[Homing]
1) 2)
[Settings]
[HSP setup]
20
Displays the system data and the settings currently in effect
Displays the parameters of the positioning set table
Displays limit values e.g. v
Displays system parameters and system data
Displays the operating system version (firmware)
Positioning travel for testing the positioning sets and for
referencing
Starts positioning travel according to the positioning set
selected
Starts reference travel (move to position 0 = pick position)
Parametrizing, programming the positioning sets ...
3)
[HSP mode]
[Position set]
[Count direction]
[Delivery status]
software end positions
max,
Teaching typical Pick&Place" sequences
(5 standard applications)
Editing the positioning set table
[Position no.]
5)
[Pos.set. mode]
4)
[Torque]
3)5)
[Position]
[Velocity]
[Save...]
Reversing the count direction
All settings undertaken in [HSP setup]
and all positioning sets are overwritten
with the factory settings.
Festo P.BE−K−HSP−AE−IO 0510NH English
Number of the
positioning set
(0...14)
Absolute or relative
positioning
Insert torque for
reducing the torque
when the nominal
position is reached
Nominal position of
the positioning set
Positioning speed of
the positioning set
Save parameters in
EEPROM