Luminance Brands Kathy Ireland Home VOLTA CF590RBQ00 Manual De Instrucciones página 27

13. Light Kit LED Driver Replacement
13.13
Reconnect the Motor AC Power Connector to the Light
Kit LED Driver Connector (Figure 53).
Reconnect the Motor DC Power Connector to the Light
Kit LED Driver Connector (Figure 53).
13.14
Replace the Upper Motor Cover by reinstalling the
six Upper Motor Cover Screws, previously removed in
Step 13.9 (Figure 54).
13.15
Route the three Motor Wires through the 4.5" Downrod
(Figure 55). Re-seat the Downrod in the Motor Coupler.
Rotate and align the two Downrod Holes with the two
Holes in the Motor Coupler as shown in Figure 55.
NOTE: It is important to keep the downrod holes
aligned with the motor coupler holes while
reinstalling the two set screws.
Reinstall the two Set Screws (previously removed) into
the Motor Coupler to capture the Downrod in place
(Figure 55).
MOTOR AC POWER
CONNECTOR
LIGHT KIT
LED DRIVER
CONNECTOR
LIGHT KIT
LED DRIVER
CONNECTOR
Figure 53
REINSTALL UPPER
MOTOR COVER
SCREWS (6)
UPPER
MOTOR COVER
Figure 54
REINSTALL
PHILLIPS HEAD
REINSTALL
SET SCREWS (2)
PHILLIPS HEAD
SETSCREWS (2)
Figure 55
27
(Continued)
MOTOR DC POWER
CONNECTOR
LIGHT KIT
LED DRIVER
DOWNROD
MOTOR
MOTOR
COUPLER
COUPLING
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF590