Description Of Functions - Saeco IDEA Manual De Uso Y Mantenimiento

English
PROGRAMMING
LANGUAGE
CUP WARMING PLATE
GROUND DOSE
TEMPERATURES
PREBREWING
PROGR. HOT WATER
MILK PROGRAMMING
functions explanation
follows in the next page
160
ITALIANO
DEUTSCH
FRANCAIS
ECC.
ON
OFF
1 STRONG COFFEE
LOW
2 STRONG COFFEES
1 WEAK COFFEE
2 WEAK COFFEES STANDARD
JUG
COFFEE WITH A
DASH OF MILK
CAPPUCCINO
HIGH
COFFEE
LOW
FIRST COFFEE
STANDARD
HIGH
OFF
SHORT
LONG
ON
OFF

12.7.1 Description of functions

LANGUAGE
- Language can be selected through the "LANGUAGE" menu
.
CUP WARMING PLATE
- By selecting "ON", the cup warming plate is switched on
together with the machine.
- By selecting "OFF", the cup warming plate remains off.
GROUND DOSE
The quantity of ground coffee, programmed during the installation,
can be adjusted at every brewing.
- By selecting "LOW" or "HIGH", the dose is decreased or
increased by 1 g.
- By selecting "STANDARD", the machine will brew the dose
initially programmed by the Maintenance Technician.
TEMPERATURES
The brewing temperature of water, programmed during the
installation, can be adjusted at every brewing.
- By selecting "LOW" the temperature decreases by 3°C.
By selecting "HIGH" the temperature increases by 3 °C.
-
- By selecting "STANDARD" the temperature will the one
programmed by the Maintenance Technician.
NOTE - The temperature "first coffee" is selected at the first
brewing, when the machine is switched on.
PREBREWING
This function allows a short dwell time during the first brewing
phase. This can improve the quality of the coffee which, during the
dwell, has the time to "infuse" into the first part of water received.
Selecting:
- "OFF", no pre-brewing is performed.
- "SHORT", the "pre-brewing" programmed by the Maintenance
Technician is performed.
- "LONG", the "pre-brewing" is extended by 1 sec.
PROGR. HOT WATER
This function enables to set the quantity of brewed hot water. By
selecting:
- "ON", the button , (Pr. 12.6) can be programmed.
-
"OFF", the button cannot be programmed, therefore the
quantity of hot water has to be manually adjusted.