Publicidad
236W / 237W
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
Phillips Head Screwdriver, Mallet or Padded Hammer and Tape Measure.
Optional: Drill & 3/16" Drill Bit
IMPORTANT:
We recommend finishing the unit before final assembly. Before finishing, read the
enclosed Finishing Hints sheet.
Note: Due to the fact that more than one type of hardwood is used,
we recommend testing for desired color.
To test for desired color on:
a) Veneer parts – apply stain to unexposed portion of the Top. See FIGURE 5.
b) Alder pieces – apply stain to back of Crown. See FIGURE 2.
237W Wide 6-Shelf
Hutch shown in all
FIG. 1
drawings.
1. Lay out the wood parts in their approximate locations to aid in the identification and assembly.
236W/237W — Page 3
Publicidad
